Free Shipping for minimum order of Php 20,000 & above. SHOP NOW.

Lumenis Cylinder Track light White

Lumenis

₱3,600.00 Regular price ₱4,500.00

Lumenis Cylinder Track Light White. Track lights can be adjusted to focus on specific areas or objects, such as artwork, countertops, or reading nooks.

The adjustable nature allows homeowners to change the direction and focus of the lights as needed, adapting to different uses of the space.

Track lighting takes up minimal ceiling space, making it ideal for rooms with lower ceilings or limited space.

Track lighting adds a contemporary and professional look to commercial spaces, which can enhance the overall brand image.

DIMENSION:

3cm x 3cm x 20cm

 

CARE INSTRUCTIONS:

  1. Turn Off the Power:

    • Ensure the track lighting system is turned off. If possible, switch off the power at the circuit breaker to ensure safety while cleaning.
  2. Remove Dust and Debris:

    • Use a soft microfiber cloth or a can of compressed air to gently remove any dust and loose debris from the track and light fixtures. Be careful not to move or dislodge the lights from their positions.
  3. Prepare Cleaning Solution:

    • Mix a few drops of mild dish soap with warm water in a bowl. Avoid using harsh chemicals or abrasive cleaners as they can damage the aluminum surface.
  4. Clean the Track and Fixtures:

    • Dip a non-abrasive sponge or a microfiber cloth into the soapy water and wring it out so it’s damp, not soaking wet.
    • Gently wipe down the aluminum track and fixtures, removing any dirt or grime. For stubborn spots or stains, use a soft bristle brush to gently scrub the area.
  5. Rinse the Aluminum:

    • Dampen another clean microfiber cloth with plain warm water and wipe down the track and fixtures to remove any soap residue.
  6. Dry Thoroughly:

    • Use a dry microfiber cloth to thoroughly dry the aluminum surfaces. This will prevent water spots and streaks from forming.
  7. Polishing (Optional):

    • If you want to restore the shine of the aluminum, apply a small amount of aluminum polish to a soft cloth and buff the surface. Always test the polish on a small, inconspicuous area first to ensure it doesn’t damage the finish.
  8. Check and Adjust Fixtures:

    • After cleaning, check that all the fixtures are securely attached to the track and properly aligned. Make any necessary adjustments to ensure the lights are positioned correctly.
  9. Turn the Power Back On:

    • Once everything is clean and dry, turn the power back on at the circuit breaker and switch on the track lighting system to ensure everything is working correctly.

Additional Tips:

  • Regular Maintenance: Regularly dust the track and fixtures to prevent the build-up of dirt and grime, reducing the need for more intensive cleaning.
  • Avoid Harsh Chemicals: Do not use ammonia, bleach, or acidic cleaners on aluminum, as they can cause damage to the finish.
  • Use Gloves: Wearing gloves can prevent fingerprints and oils from transferring to the aluminum surfaces.
  • Inspect Wiring: Periodically check the wiring and connections to ensure there are no loose or frayed wires, which can pose a safety hazard.